Milestones

We hit three really significant milestones on projects this week: Mars Lights finished basic tracking (drums & 2 guitars) for our double LP, I finished recording drums for the howie&scott record, and I ordered parts for a fun of five Falcon Heavy Drive pedals.

I don’t know exactly when to say we started the Mars Lights project.  We started setting up mics in 2015 on July 1, were checking placement and phase and did some recording (maybe just testing, maybe truly aiming for real takes) on August 18, and were in full swing by September 11.  Call it a year and a half, done amidst a two-year-old (Charlie) and a new arrival (Caroline); in my mind that’s making good time.

We’re going to start booking shows again, and Drew and I will work on overdubs when we’re not practicing.  It’s possible we could have something out in 2017, though 2018 seems more likely.

I’ve collected potential h&s songs and riffs for as long as we’ve written them.  Some that will be on this record date back to 2003, possibly 2002.  I started to see the outlines of the tracklist in 2013-14, and broached the subject with Scott in July 2015 (probably the 9th or 10th).  Since then I’ve been working on the demos, wrote a new thing or two, had my first drum recording session in September 2016 and now have finished the drums.

My goal now is to get the songs to a point where Scott can do his parts by the time his students are off for the summer.  I haven’t decided to what extent that means just throwing down scratch guitars and vocals for him to react to, or actually working on my real parts.  The latter is better in theory, but I may not have time; we’re envisioning layers of various guitars, bass, and keys entering and exiting throughout the songs and those parts take time to write, dial in sound for, and record.  Maybe a hybrid approach will work, trying to get the two most important parts down or something.

The Falcon Heavy Drive has grown out of my experience using the first Falcon I built (which now I think of as a prototype) and some electronics things I’ve learned since I first did the design.  It sounds similar to the prototype but everything about it has been implemented better and it’s more flexible with an added bass control and more ways to route the mid notch.  I’m pretty psyched to have it on my board myself, get it into others’ hands, and to clear off the board for new designs.